PULLEYS & PULLEY PULLER

PULLEYS: | ZINC | SINGLE INLET | FIXED ZINC | PACKAGED FIXED ZINC | BLOWER PULLEY | PULLEY PULLER |

VARIABLE PULLEYS

IMPORTANT: Variable Pulleys must be opened 2-1/2 to 5 full turns (depending on air resistance) or motor will overheat. If motor cycles
(stops and starts due to over-heating), open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened,
you must use next SMALLER pulley. Always use pulley size recommended by cooler manufacturer.

FIXED PULLEYS

Note: Fixed pulleys below are sized to avoid overloading cooler motors that are installed without using an ammeter.

6100

PKG      QTY    WT
Label.......5.......6.6

MOTOR PULLEY PULLER

Removes blower or motor pulley from shaft.

3-1/4" x 1/2"- 1/3 HP

6122 to 6124

PN       PKG      QTY    WT 6122.....Bulk.....20.....17.5 6123.....Bag......10......7.5 6124.....Pkg.......6......5.5

VARIABLE MOTOR PULLEYS

3-1/4" x 1/2"- 1/3 HP

3-1/4" x 5/8"- 1/3 HP

6129

PKG      QTY    WT
Label.......5......17.2

VARIABLE MOTOR PULLEY

5/8" Bore Pulleys Have Keyways

3-1/4" x 5/8"- 1/3 HP

3-1/2" x 1/2"- 1/2 HP

6143 to 6145

PN        PKG    QTY   WT 6143.....Bulk.....20....20.3 6144.....Bag......10....10.0 6145.....Pkg.......6......6.3

VARIABLE MOTOR PULLEYS

3-1/2" x 1/2"- 1/2 HP

3-1/2" x 5/8"- 1/2 HP

6146

PKG      QTY    WT
Label.......5......17.2

VARIABLE MOTOR PULLEY

5/8" Bore Pulleys Have Keyways

3-1/2" x 5/8"- 1/2 HP

3-3/4" x 1/2"- 1/2 or 3/4 HP

6148 to 6151

PN       PKG    QTY   WT 6148.....Bulk.....20....23.1 6149.....Pkg.......6......7.2 6151.....Bag.....10....11.7

VARIABLE MOTOR PULLEYS

3-3/4" x 1/2"- 1/2 or 3/4 HP

3-3/4" x 5/8"- 1/2 or 3/4 HP

6153

PKG      QTY    WT
Label.......5......17.2

VARIABLE MOTOR PULLEY

5/8" Bore Pulleys Have Keyways

3-3/4" x 5/8"- 1/2 or 3/4 HP

4" x 1/2"- 1 HP

6170

PKG      QTY    WT
Label.......5......17.2

VARIABLE MOTOR PULLEY

4" x 1/2"- 1 HP

4" x 5/8"- 1 HP

6172-6173

PN       PKG    QTY   WT 6172.....Bag......10......7.0 6173.....Pkg.......6.....10.1

VARIABLE MOTOR PULLEYS

5/8" Bore Pulleys have keyways

4" x 5/8"- 1 HP

3-1/4" x 1/2"- 1/3 HP

6190-6191

PN       PKG    QTY   WT 6190.....Bulk.....20.....25.5
6191.....Bag.......6.......8.0

CAST IRON VARIABLE MOTOR PULLEYS

3-1/4" x 1/2"- 1/3 HP (replacement for 1VL34)

3-1/2" x 1/2"- 1/2 HP

6192-6193

PN       PKG    QTY   WT 6192.....Bulk.....20.....29.0
6193.....Bag.......6.......8.8

CAST IRON VARIABLE MOTOR PULLEYS

3-1/2" x 1/2"- 1/2 HP

3-3/4" x 1/2"- 1/2 or 3/4 HP

6194-6195

PN       PKG      QTY   WT 6194.....Bulk.....20....30.3 6195.....Bag.......6......9.6

CAST IRON VARIABLE MOTOR PULLEYS

3-3/4" x 1/2"- 1/2 or 3/4 HP (replacement for1VL40)

3-3/4" x 5/8"- 1/2 or 3/4 HP

6196

PKG      QTY    WT
Label.......5......17.2

CAST IRON VARIABLE MOTOR PULLEY

5/8" Bore Pulleys have keyways

3-3/4" x 5/8"- 1/2 or 3/4 HP

4.15" x 1/2"- 1 HP

6197

PKG      QTY    WT
Label.......5......17.2

CAST IRON VARIABLE MOTOR PULLEY

For 1 H.P. Single Inlet Coolers

4.15" x 1/2"- 1 HP

4.15" x 5/8"- 1 HP

6198-6199

PN       PKG    QTY   WT 6198.....Bulk.....6....12.2 6199.....Bag......6.....8.2

CAST IRON VARIABLE MOTOR PULLEYS

5/8" Bore Pulleys have keyways

For 1 H.P. Single Inlet Coolers

4.15" x 5/8"- 1 HP (replacement for 1VL44)

PACKAGED-BULK

6207 to 6298

PN          SIZE     QTY  WT
6207......2" x "....20...5.7 6209......2" x 5/8"...20...5.3 6211.2" x "....20...9.2 6235...2" x "....20...9.5 6237...2" x 5/8"...20...8.8 6240...2" x "....20....7.9 6255...2" x 5/8"...20...10.4 6262......3" x "....20....9.2 6271......3" x 5/8"..20....9.7 6280...3" x "...20...10.6 6286...3" x 5/8"..20...10.1 6293...3" x "...20....9.4 6298...3" x 5/8"..20...10.1 6298......4" x 5/8"..20...13.5

FIXED MOTOR PULLEYS

5/8" Bore Pulleys Have Keyways

PACKAGED

6215-6216

PN       PKG    QTY   WT 6215.....Bag.....10......4.8 6216.....Card.....6......2.9

1/3 HP FIXED MOTOR PULLEYS

2-1/4" Dia. x 1/2" Bore

PACKAGED

6244-6245

PN       PKG    QTY   WT 6244.....Bag.....10......4.1 6245.....Pkg.......6......2.7

1/2 HP FIXED MOTOR PULLEYS

2-3/4" Dia. x 1/2" Bore

PACKAGED

6264-6265

PN       PKG    QTY   WT 6264.....Bag.....10......5.2 6265.....Pkg.......6......3.3

3/4 HP FIXED MOTOR PULLEYS

3" Dia. x 1/2" Bore

6307 to 6341

PN         SIZE    QTY  WT
6307.....7" x 5/8"...5....5.7 6309.....7" x "....5....5.1 6310.....7" x 1"......5....5.2 6311.....8" x 5/8"...5....6.3 6312.....8" x ".....5....5.8 6314.....8" x 1"......5....5.7 6319.....9" x ".....5....8.9 6321.....9" x 1"......5....8.6 6322.....9" x 1"......5....9.6 6323...10" x ".....5....9.0 6324...10" x 1"......5....8.5 6327...11" x 5/8"....5....9.5 6328...11" x ".....5...10.2 6330...11" x 1"......5...10.5 6336...12" x ".....5..11.6 6338...12" x 1"......5..11.6 6339...14" x 5/8"...5..14.6 6340...14" x "....5..14.8 6341...14" x 1".....5..14.3

BLOWER MOTOR PULLEYS

WITH KEYWAY

6752 to 6757

PN    SIZE   PKG   QTY   WT 6752....."....Clam.....5....0.3 6755......1".....Clam.....5....0.6 6757..."&1"..Clam.....5....0.5

BLOWER SHAFT PLUG

Use as a plug to remove blower pulley on coolers with hollow shafts.

Copyright © 2015 Dial Manufacturing, Inc. ~ Updated: 4/11/16
About Us | Contact Us | Terms of Use
Download the web's best free web site templates at JustDreamweaver.com